<img height="1" width="1" alt="" style="display:none" src="https://www.facebook.com/offsite_event.php?id=6008611837624&amp;value=0">

Marketing Mining Equipment Maintenance

Mon, Oct 26, 2015 @ 09:35 PM / by Chuck Lohre

Lohre Marketing and Advertising Design Author Graphic

The following is an article we wrote for our client Stedman Machine Company for AGGREGATES MANAGER magazine.

Impact Crusher Maintenance and Operation

By Eric Marcotte, Inside Sales, Stedman Machine Company

There’s an urban legend out there about the company whose maintenance crew mistakenly installed a new crusher with the rotor spinning backwards. It still worked! And you think you have issues?

To get the most from your equipment investment, you need to put in the time.  Yes, a crusher costs a bit more than your average automobile, but that doesn’t mean it’s maintenance free. An automobile needs oil changes too, right? Performing regularly scheduled maintenance on impact crushers is crucial for guaranteeing day-to-day reliability and optimum product output. Did you know you can boost output and quality by doing just a little bit more? Even daily cleanups and inspections can increase service life. A no-brainer, though possibly easier said than done.  And, with that, here are some steps and practices to make routine and continuous. Beginning with maintenance team education, parts logs and general maintenance record keeping, plus troubleshooting, this document goes the distance.


• Proper training for consistent maintenance is one of the most fundamental requirements for successful, reliable production. Begin with the crusher’s operation and maintenance manual.  Incorporate the manual’s suggested routine maintenance schedule into the maintenance team’s duties. Appoint a “lead person” for each crusher as the go-to who knows the machine. This person is the historian for the unique operational adjustments the producer has incorporated for raw feed and product requirements.

Daily Log (every 8 hours):

Be ready to document the following:

• Amperage draw to see if it changes from day to day. If amperage is exceeding normal levels, it could be a signal of bearing problems, loose belts or general feed issues.

• Coast-down time. You’re going to need to know (and log) how long it takes the machine to come to a complete stop after shutdown. Here’s why: If the time starts to shorten, this could indicate a bearing problem.

• Oil pressure. You’ll want to record performance in a variety of operating conditions. This will allow you to identify trends and help to detect problems before they cause costly damage or downtime.

Daily Maintenance (every 8 hours):

• Check oil level, sight glass, grease appearance and other lubrication schedules.

• Check high temperature or low hydraulic pressure indicators and switches.

• Check wear parts.

• Tighten bolts.

• Inspect belts.

• Remove dirt and debris from crusher frame surfaces and areas around the machine.

• Check intake/discharge chutes for any obstructions and or build up.

• Check alarms – If electrical changes are made or programs are altered in automated systems, verify that all alarms and interlocks function properly. Don’t be afraid to replace switches or timers that appear damaged or are in poor condition. This is more economical than a major overhaul. But never disable or alter any alarms or interlocks!


• Completely drain and thoroughly clean out the inside of the oil tank (if you have one) to eliminate any contaminants before refilling.

• Find contaminant sources. Contaminants such as dust particles and water can get in where oil leaks out.

• Inspect hydraulic systems and tag any leaks for corrective action on the very next maintenance cycle.

• Oil – proper grade.

• Filters – proper specification.

• Keep the oil breathers clean.

• Grease versus oil lubrication – Grease requires less-intensive maintenance than that of oil-lubricated systems. Automatic oil lubrication systems or sealed cartridge bearings are for higher speed crushers like vertical shaft impactors, air swept fine grinders or high speed cage mills. Most horizontal shaft impactors, hammer mills and cage mill applications are below 1,000 rpm and grease is sufficient.

• Scheduled oil sampling program – By creating a baseline of normal wear, it helps indicate when abnormal wear or contamination is occurring. The exact condition of a mechanical assembly is reflected in the oil.


• Inspect V-belt drives for damaged belts or loose belt tension. By replacing cracked, glazed, torn or separated belts, plus maintaining proper belt tension, you’ll optimize your plant’s performance.

Wear Parts:

• Don’t overextend wear parts. Avoid running them so long that they become too worn. You may find that you can no longer rotate breaker bars or interchange wear plates to lower wear areas – and now, you’ve lost half of the wear.


• Rubber and chain curtains located in the feed and discharge openings of the crusher are subject to wear and tear. Since they are a first line of protection, it’s important to inspect them regularly and to establish a schedule of regular maintenance.


• When (or if) electrical changes are made, you’ll need to verify that all alarms and interlocks still properly function. Same goes for programs when altered in automated systems. Always check with the manufacturer before making any modifications.

Spares Recommendation:

• Keep the recommended spares on hand and order replacements as soon as they are used. A list of recommended spares may be included with your equipment operations manual.  If not, contact the manufacturer for recommendations.

Update Your Equipment:

• All equipment evolves and the recommended manufacturer upgrades are a good investment for increased life and better crusher performance. Check with the manufacturer for any possible updates.

Unapproved Modifications:

• Manufacturer design engineers have considerable field experience, which help them as they calculate the design and perform prototype testing. Their engineering tasks include calculating bearing loads and bearing clearances. They’ve also worked to maximize throughput by establishing the most efficient speed and setting combinations to optimize impact on the material undergoing reduction. So when plant personnel suggest modifications that alter the intended design, these changes will more than likely hurt the purpose of the original design. As a result, you’ll have a less productive and reliable crusher due to potential damage and overload.  Since the manufacturer has a vested interest in how well the crusher performs, contact them before making any modifications!

Cage Mill Operation & Maintenance

Requirements for Optimum Production and Wear Part Utilization:

• To increase Multi-Cage Sleeve Life - Cage rotation should be reversed regularly if possible. ( Some cage mills can be reversed while others cannot.)  By reversing the cage direction, sleeves will be worn from both sides, thus extending wear life.

Wear Parts:

• Sleeves – index and or replace periodically.

• Hopper Ring and Shaft Protector – Inspect or replace if needed, cage rebuilding is an option.


• Spherical Roller Bearings in Pillow Block Housings – Follow the manufacturer’s recommended specifications and schedule for lubrications, temperature and vibration ranges.

Typical_sleeve_wear_patterns Marketing Mining Equipment Maintenance

Typical sleeve wear patterns

Cage_wear-pattern_identification Marketing Mining Equipment Maintenance

Cage wear-pattern identification

Horizontal Shaft Impactor Operation & Maintenance

Variables Affecting Product Gradation:

• Rotor Speed – Higher rotor speeds produce finer product output.

• Apron Gap Settings – Closer gaps retain the feed longer producing a finer product.

• Breaker Bar Wear – Regular inspection and turning will lower operating costs.

• Throughput (tons per hour) – Overfeeding a crusher can make the output more coarse, but it also causes a number of wear and longevity issues making overfeeding a major concern to avoid.

• Moisture – Moisture cushions the impact, producing a coarser product.

• Apron Wear – Worn plates can be replaced or moved to areas of lower wear

• Spring Bridge Operation – Spring set height is critical to maintain proper operation of spring bridges. Spring bridges return the aprons to their original positions after an overload situation. The use of altered or non-specified springs can cause equipment damage or catastrophic failure.

Breaker_Bar_Wear, Marketing Mining Equipment Maintenance

Breaker Bar Wear

New Edges Crush Finer

Breaker_Bar_Changes, Marketing Mining Equipment Maintenance

Breaker Bar Changes

Requirements for Optimum Production and Wear Part Utilization:

• Protect inlet and outlet:

• Restrict maximum feed size.

• Maintain feed rate within allowable limits.

• Check rotor rotation.

• Metal detection required.

• Check for wear.

• Follow recommended breaker bar rotation setting sequence.

• Check rotor breaker bar, wedge, and stop block or jack screws.

• Check liners and breaker plates.

Vertical Shaft Impactor Operation & Maintenance

The vertical shaft impactor uses high rotor speeds (1,000 to 3,000 rpm) to apply high energies to the material and since “Energy + Material = Size Reduction” it can create sand from two inch feed.

Requirements for Optimum Production and Wear Part Utilization:

• Limit feed size.

• Metal detection required.

• Observe for any vibrations with the use of continuously monitored vibration sensors. Listen to the equipment, if something sounds unusual, shut down and inspect.

• Limit re-circulating product in a closed system.

• If using water for dust suppression, introduce it into the discharge area if possible, introducing water in the intake will increase wear.

• Weight match shoes, like weights should be placed opposite one another.

Wear Parts:

• Shoes, Tubes

• Anvil Ring or other inserts

• Housing Liners

• Rotor Table Liners and Assembly

Spares Recommendation:

• Shoes (1 complete set)

• Table liner

• Anvils (1 complete set)

• Discharge plate

Picture6, Marketing Mining Equipment Maintenance

In this case (shown in photo), the rotor tubes have been rotated 90 degrees and rotation has been reversed to optimize the life of the wear parts. This producer is happy that they are able to get the most use from their wear parts.

Hammer Mill Operation & Maintenance

Up running hammer mills combine impact and shear to reduce material. Down running hammer mills primarily use shear by immediately taking feed to the screen or grate bars where hammers shear the material, until it passes through the openings.

Requirements for Optimum Production and Wear Part Utilization:

• Lubricate bearings regularly

• Regular Inspection (Unclamp or unbolt front upper half housing for access to screens and hammers): Liners, Hammers, Hammer Bolts, Rotor Discs, Grate Bars and Screens

Spares Recommendation:

• Hammers

• Screens

• Liners

• Grinding Plate


A partnership begins between the manufacturer and the customer when the crusher is installed in the field. The manufacturer needs the customer’s help as much as the customer needs the manufacturer’s help to achieve the highest performance possible. Maintenance service after the sale, although mentioned last, is a central part of crusher system performance. And just in case, the manufacturer will have the people and the parts available 24/7 to assist with any problems.

Regardless of the field application, the training of personnel is key to successfully and optimally operating equipment. For the size-reduction industry, crusher maintenance problems are mostly related to inadequate training. This exists at plants both large and small. The most effective education is a current and ongoing program for crews – and that’s what will result in legendary performance.

Strategic Content Creation Handbook by Cincinnati Advertising Agency, Lohre & Associates

Topics: Marketing, Mining Equipment Marketing, Equipment Marketing and Advertising

Lohre Advertising, Graphic Design, and Website Design Author Photo

Written by Chuck Lohre

Owner of Lohre & Associates Marketing Communications. The company celebrated their 80th Anniversary in 2015, his 38th.